Be Cool Solutions™ 40% White Pearl Tape Knit Shade Cloth, Grommeted Panel

Grommeted Panel (currently viewing)

The edges of these panels are sewn with heavy-duty reinforcing tape. Brass grommets are installed on approx. 2' centers around the perimeter. Often includes a seam where two pieces of shade have been sewn together. Durable, easy to install with ropes, bungees or wire. Most durable solution for smaller areas where shade will be suspended between four points. Grommeted panels are sold in pre-cut sizes or can be ordered in any custom size.

Precut Panel

A raw piece of shade fabric where edges of panel are not reinforced with any tape or grommets. Would not typically have a seam but may have a raw (cut) edge. Can be installed with wiggle wire, shade cloth clips or wooden lath. Precut Panels are sold in pre-cut sizes or can be ordered in any custom size.

Bulk

Sold in factory widths by the linear foot. Would only rarely have a seam and sides typically include a factory finished (uncut) edge. Most cost effective solution for large quantities of shade fabric.

40% density will block out 40% of light. Perfect for use over patios or flowering plants which will be effected by longer natural light exposure due to an increase in light quantity and duration. This white polyethylene fabric absorbs and reflects the white scattered light from the atmosphere. The interior of the structure is cooler than that covered by black shade cloth in hot weather conditions, as white shade cloth reflects the heat.

• Fabricated pieces include black reinforcing tape on all four sides. Reinforcing tape is a seat belt like material that provides extra durability along the edge of the piece and allows installation of grommets.
• Fabricated sizes include a brass grommet in each corner of the piece and approximately every 2' apart around the entire perimeter. Grommets allow easy installation using rope or zip ties.